Page 83 - CATALOG JALLATTE 2024 EN
P. 83
TECHNOLOGIES
LINING
®
A GORE-TEX membrane is an extremely thin layer of expanded polytetrafluoroethylene (ePTFE).
It contains more than 1.4 billion pores per cm². All these pores guarantee the properties of GORE-
®
TEX fabrics. It is only 0.01 mm thick. It is attached to a lining or a high-performance outer fabric,
®
which results in a GORE-TEX laminate.
Breathable thermal insulating lining designed to ensure the perfect balance inside the shoe
in any condition the perfect equilibrium inside the footwear. It keeps you cool in summer and
warm in winter.
3D mesh lining, that is technical, innovative and anti-bacterial, capable of combining high
performance breathability and abrasion resistance with a feeling of softness and comfort.
Its special 3-layer structure promotes thermoregulation to keep the foot dry and in complete
comfort.
3D mesh lining, made using three-dimensional fabric and combined with a foam to ensure
protection and comfort, in addition to an open structure (grille) required for peripheral
ventilation of the foot.
The lining has a specially designed honeycomb structure and uses micro ventilation channels
to ensure high levels of breathability. It is also resistant to abrasion, tearing and cutting.
3D mesh lining, with micro-ventilation technology, smooth appearance, 3-layer structure
consisting of a textile mesh, foam and reinforcement grille. High mechanical strength (abrasion
and tearing) and rapid drying.
TOE CAP
Steel toe cap resistant to 200 J. Perforated for increased breathability
Lightweight, non-magnetic 200J aluminium toe cap. While providing the same strength, it
is 51% lighter than a steel toe cap. More resistant to impact and possible compression, the
B toe cap meets the higher requirements of the new EN ISO 22568-4:2020 standard (new
requirements and test methods for footwear components).
Synthetic polymer toe cap, resistant to 200 J, non-magnetic and non-thermal. Memory foam
toe cap, it returns to its original shape in the event of crushing, thus facilitating the release
of the foot. More resistant to impact and possible compression, the B toe cap meets the
higher requirements of the new EN ISO 22568-4:2020 standard (new requirements and test
methods for footwear components).
81